×
Hallo #StiketsLover!
Los geht's!
Sie können jetzt Ihre Bestellung mit 12% Rabatt aufgeben.
Sie können jetzt Ihre Bestellung mit 12% Rabatt aufgeben.
Inadequate output capacitance or high-ESR capacitors. Solution: Add a 0.1µF high-frequency bypass capacitor directly across VOUT and GND. Ensure ceramic capacitors (X7R/X5R) are used, not tantalum.
Output voltage not within ±10% of target. Possibly a damaged feedback resistor or incorrect soft-start timing. Solution: Measure FB pin voltage. If not 0.6V, check the resistor divider. Short the SS pin to GND to reset.
| Pin # | Name | Description | | :--- | :--- | :--- | | 1-4 | VIN | Power input. Connect to 4.5-18V supply. Bypass with 10µF ceramic. | | 5 | EN | Enable pin. Drive >1.2V to turn on. Tie to VIN for always-on. | | 6 | SS | Soft-start capacitor. 0.1µF to GND sets 2ms startup ramp. | | 7 | FB | Feedback voltage. Connect resistor divider from VOUT. Target 0.6V. | | 8-11 | GND | Power ground. Connect to exposed pad. | | 12-15 | SW | Switching node. Connect to inductor (internal in module version). | | 16 | PG | Power Good. Open-drain output. Pull up to VCC with 10kΩ. | | EP | Exposed Pad | Thermal pad. Must solder to PCB ground plane. |
. It serves as the "brain" of modern Optical Network Units (ONUs) that deliver high-speed internet over GPON (Gigabit Passive Optical Network). Key Performance & Specs
: Providing a single hub for fiber internet, home networking, and smart home connectivity.
While detailed internal registers are typically proprietary to Broadcom's customers, the BCM68252 generally features:
While the is powerful, engineers should watch for:
Inadequate output capacitance or high-ESR capacitors. Solution: Add a 0.1µF high-frequency bypass capacitor directly across VOUT and GND. Ensure ceramic capacitors (X7R/X5R) are used, not tantalum.
Output voltage not within ±10% of target. Possibly a damaged feedback resistor or incorrect soft-start timing. Solution: Measure FB pin voltage. If not 0.6V, check the resistor divider. Short the SS pin to GND to reset.
| Pin # | Name | Description | | :--- | :--- | :--- | | 1-4 | VIN | Power input. Connect to 4.5-18V supply. Bypass with 10µF ceramic. | | 5 | EN | Enable pin. Drive >1.2V to turn on. Tie to VIN for always-on. | | 6 | SS | Soft-start capacitor. 0.1µF to GND sets 2ms startup ramp. | | 7 | FB | Feedback voltage. Connect resistor divider from VOUT. Target 0.6V. | | 8-11 | GND | Power ground. Connect to exposed pad. | | 12-15 | SW | Switching node. Connect to inductor (internal in module version). | | 16 | PG | Power Good. Open-drain output. Pull up to VCC with 10kΩ. | | EP | Exposed Pad | Thermal pad. Must solder to PCB ground plane. |
. It serves as the "brain" of modern Optical Network Units (ONUs) that deliver high-speed internet over GPON (Gigabit Passive Optical Network). Key Performance & Specs
: Providing a single hub for fiber internet, home networking, and smart home connectivity.
While detailed internal registers are typically proprietary to Broadcom's customers, the BCM68252 generally features:
While the is powerful, engineers should watch for:
Erhalten Sie 15 % Rabatt
bei Ihrer ersten Bestellung
Erhalten Sie 15 % Rabatt
bei Ihrer ersten Bestellung
Hallo #StiketsLover!
Ihre Sendung, schnell und sicher
Versand an Lieferadresse und Abholstation möglich bcm68252
*Angerechneter Beitrag von 1,99 € für nachhaltigen Für Aufkleber und Magnete mit hochgeladenem Bild des Kunden: 5 Tage ab Designfreigabe Inadequate output capacitance or high-ESR capacitors
