: If you see a "Code 10" (STATUS_DEVICE_POWER_FAILURE) in Device Manager, your Bluetooth card is likely too old or incompatible, and there is no software fix. Unsupported Hardware
If your Bluetooth radio has a yellow exclamation mark in Device Manager with a Code 10 or Code 31 error, you likely have a stuck registry entry. PowerShell as Administrator Run the following command to remove the filter requirement: bthps3 bluetooth host radio not found
If none of the above works, please share: : If you see a "Code 10" (STATUS_DEVICE_POWER_FAILURE)
The "Bluetooth host radio not found" error during installation or uninstallation usually occurs when the setup cannot detect an active, compatible Bluetooth stack . This often happens if the filter driver (BthPS3PSM) was not properly loaded or if there is a conflict in the Windows Registry. Primary Fixes for "Host Radio Not Found" Bthps3 Bluetooth Host Radio Not Found This often happens if the filter driver (BthPS3PSM)
Run the configuration utility. It often provides a "Fix" or "Install Service" button that can re-register the filter driver with the OS. Advanced "Hard Reset" If the error persists, the cleanest fix is to: via "Apps & Features." Device Manager , right-click your Bluetooth Radio, and select Uninstall Device (check "Attempt to remove the driver for this device").
The "Bluetooth host radio not found" error in BthPS3 typically occurs when the installer or driver cannot communicate with your Bluetooth hardware because of or unsupported hardware .