Fanuc Series | Oitf Plus Programming Manual __full__

| G-code | Function | Notes for Oi-TF Plus | |--------|----------|----------------------| | G71 | Stock removal in turning (Type I & II) | Supports pattern repetition with constant depth or cutting amount. | | G72 | Facing cycle | For radial roughing. | | G73 | Pattern repeating cycle | For roughing castings/forgings. | | G76 | Threading cycle | Multi-repetitive cycle with infeed angle control (parameter 5130). | | G83 | Peck drilling cycle | For deep hole drilling on lathe with live tools. | | G96/G97 | CSS / RPM mode | CSS with G50 max speed clamp. |

The "Programming Manual" shines in its explanation of canned cycles. On a Fanuc lathe, these cycles save massive amounts of code. The Oi-TF Plus manual breaks these down into digestible flowcharts.

Programs are typically written in standard Fanuc G-code with Fanuc-specific extensions for turning. A program consists of: fanuc series oitf plus programming manual

The programming manual is structured around several critical domains that allow a programmer to master the machine: Coordinate Systems and Motion Control

G00 X(U)__ Z(W)__;

To effectively program the Fanuc Series OiTF Plus, it's essential to understand the following techniques:

The manual is logically partitioned into volumes or major sections (typically B-64694EN). Key parts include: | G-code | Function | Notes for Oi-TF

Below is a structured breakdown of the typical content found in this manual: 1. Fundamental Programming Concepts