Prosecure Opti Combi Manual English Here
: Before use, ensure all objects that do not belong in the door area are removed to prevent false calibration. Adjustments Detection Area
| Issue | Probable Cause | Recommended Solution | | :--- | :--- | :--- | | | E-Stop engaged; Air pressure low; Door open. | Release E-Stop; Check pressure regulator; Close safety guards. | | Inconsistent Fill Levels | Product supply pressure fluctuating; Worn nozzle seal. | Stabilize product pump pressure; Check/replace nozzle O-rings. | | Dripping Nozzle | Worn valve seals; Product viscosity too low. | Replace valve seals; Adjust shut-off timing on HMI. | | Caps not tightening | Incorrect torque setting; Worn cap gripper jaws. | Adjust torque via regulator; Replace gripper jaws. | prosecure opti combi manual english
The manual walks you through entering the (default is often 0000 or 1234 —but change it immediately!). You’ll learn how to: : Before use, ensure all objects that do
Q: Can I install the ProSecure Opti Combi myself? A: It is recommended to have a qualified engineer install the ProSecure Opti Combi, as they will be able to ensure a safe and correct installation. | | Inconsistent Fill Levels | Product supply
Typically optimized for 2.0 to 3.0 meters (check specific unit for maximum range).
Use the provided mounting template. The sensor should be centered above the door opening Initialization: