Disconnect the USB cable. Remove the battery for 10 seconds (hard reset). Re-insert the battery and turn on the meter. The first boot will take 60-90 seconds as it rebuilds the file system.
If the software does not detect the meter, try turning the meter off and then back on after clicking start in the software. satlink ws-6906 software upgrade
: SatlinkTools or the dedicated WS-6906 Updater utility. Firmware File : A valid .bin firmware file specific to the . Upgrade Procedure 1. Preparation Disconnect the USB cable
Follow these steps precisely. The process involves entering "Download Mode" on the WS-6906. The first boot will take 60-90 seconds as
💡 : If the PC does not detect the meter, ensure your USB-to-Serial driver is correctly installed and that you are using the correct baud rate (usually 115200) if manually configurable. Satlink WS-6906 Software Upgrade Guide | PDF - Scribd