Monitor the humidity indicator; the system is designed for minimal maintenance, but keeping it dry is critical. Daily Calibration:
How to safely unbox and initialize the optical bench. spectrum two ftir spectrometer manual free
A unique humidity shield that protects the internal optics, extending the life of the desiccant—typically up to 5 years. Dynascan Interferometer: Monitor the humidity indicator; the system is designed
Features moisture-resistant KBr windows standard, with optional ZnSe windows for high-humidity environments. Open the sample compartment; is the red laser (HeNe) visible
| | What the Manual Says | DIY Fix | | :--- | :--- | :--- | | Red light / "Interferogram too small" | The beam is blocked or the detector is saturated. | Check if the accessory is fully seated. Open the sample compartment; is the red laser (HeNe) visible? If not, the source may be burned out. | | High noise / Low energy | Water vapor in the purge path or a dirty detector window. | Run a "Desiccant Regeneration" cycle (navigate to Tools > Maintenance). The Spectrum Two has a rechargeable desiccant pack behind the front flap. | | "Invalid Accessory ID" | The RFID chip on the QuickSwap accessory is dirty or dead. | Wipe the black plastic base of the accessory with a dry cloth. Restart the software. | | Baseline sloping downward sharply | The ATR crystal is not fully in contact (solids) or the diamond is cracked. | Re-sandwich the sample. If the crystal is cracked, you need a $2,000 part – call service. |